normakte  /  CE marking

CE marking of the machine

The marking itself does not change. What changes is what it means from 20 January 2027 — and when a number must appear beside it.

The CE marking is neither an award nor a test mark. It is a declaration by the manufacturer that the product meets all applicable Union harmonisation legislation that provides for it. It is affixed visibly, legibly and indelibly, before placing on the market.

Art. 23Art. 24Art. 46

When the notified body number is part of it

Not always. The number follows the CE marking only where the notified body is involved in production control — that is, in the procedures of Art. 25(2)(a),(b),(c) and (3)(b),(c),(d). For Module A, internal production control, no number appears beside it.

What counts as a formal non-conformity

Art. 46 lists them expressly. Four of the seven points concern the marking: the CE affixed in breach of the rules; the CE not affixed; the number missing or wrongly affixed; the contact details missing or incomplete. The consequence is not merely a reprimand: if the state persists, making available can be restricted or prohibited and the product recalled.

What else belongs on the machine

ParticularBasis
Model, series or type, year of construction, batch or serial numberArt. 10(5)
Name or registered trade mark, postal address, website or email — with a single point of contactArt. 10(6)
Where the instructions are digital: how to access themArt. 10(7)(a)

The year of construction is a new point to watch: it goes on the nameplate and is the year manufacturing was completed, not the year of delivery.

Where the product is covered by several Union acts requiring an EU declaration of conformity, a single declaration is drawn up for all those acts.

Art. 21(3) Regulation (EU) 2023/1230 · Art. 28(3) Regulation (EU) 2024/2847

From 2027 one CE marking carries two regulations: if the machine is also a product with digital elements, the Cyber Resilience Act applies as well — no second CE. For software without a physical carrier, the marking appears on the EU declaration of conformity or on the website, not on the product.

The technical file for your machine

Register of all Machinery Regulation requirements, documents with checksum, declaration and nameplate with QR code – one trial file free until 20.01.2027.

Create a trial fileCreate a declaration

Read next

Sources. References from the versions published in the OJ: Regulation (EU) 2023/1230; Regulation (EU) 2024/2847. The official text prevails; normakte is a drafting aid, not legal advice.